Stud and Track Forming Machine

Light steel stud is the best wood substitute materials.Using high-quality cold-rolled continuous hot dip galvanized sheet for raw materials,Material uniformity, high strength steel for good corrosion resistance

(Drywall stud & track roll forming machine)

video http://www.tileformer.com/uploadfile/200859231928.wmv

Metal Studs profiles are used for Dry wall partition and ceiling suspension.

Dry Wall Partition Beam / Stud Partition Roll Forming Machine

Dry Wall Partition Beam / Stud Partition Roll Forming Machine Layout

Forming Technology of Dry Wall Partition Beam / Stud Partition Roll Forming Machine:
Decoiler---feeding material ---roll-forming--- straightening ---mould cutting---completed product
Components of Dry Wall Partition Beam / Stud Partition Roll Forming Machine:
It is consisted of a decoiler, main forming machine, straightening part, cut-to length part, run-out table, electrical control system, etc.
Main Specifications of Dry Wall Partition Beam / Stud Partition Roll Forming Machine:
□ Decoiler: Max load 1000kg
□ Main Forming Machine
□ Portal-type frame style: A3 steel
□ Roller Station: 15 sets rollers
□ Roller shaft diameter: φ36mm,surface: 200 mm
□ Raw material: 0.5mm - 1.3mm, Q195, Q235
□ Main motor: 5.5Kw
□ Roller: 1 set
□ Cutting part: automatic punching cutting style
□ Run-out table: roller style
□ Control system: PLC
□ Max feed material width:＜200mm
Delivery time: within 60 days
Dry Wall Partition Beam / Stud Partition Profiles

• Metal Stud
• Wall Angle
• Main Channel
• Furring Channel
• Metal Track

Relevant Dry Wall Partition Beam / Stud Partition profiles
There are many kinds of profiles of the dry wall partition beam & stud partition as different markets have different requirements, usually, we can design and produce the forming machines according to clients' drawings or samples.
Clients can take the above parameters and pictures as reference.

 

stud forming machine

1.       working speed:12-15m/min (exclude punching and cutting)

2.       Roller stations: 14 stations

3.       Roller material: GCr15 steel, quenching HRC58-62,surface coated chrome with thickness 0.05mm

4.       Main power: 4kw

5.       Oil pump: 3kw

6.       Hydraulic: 12Mpa

7.       Control system: PLC, Panasonic

8.       Coder: OMRON

9.       Cutting system: Hydraulic, material:Cr12Mov

10.   Size: 5500x800x750mm

11.   Coil thickness: 0.5mm-1.2mm

12.   Tolerance: 3m±1.5mm

13.   Transmission: Chain